UniTemp RSS 3X210-S

Reflow Solder System for serial production

The RSS-3X210-S Reflow Solder System is a very compact and easy useable tool for the use in laboratories and clean rooms as table top unit. The chamber is vacuum sealed and equipped with a viewing window. This allows the view control of the soldering process. The unit is standard equipped with a Mass Flow Controller for the process gas.

The reflow solder system is perfect for the following applications:

flux-less soldering
flip chip process
adhesive bonding
solder bump reflowing
soldering of power devices
heat treatment of semiconductor wafers
prototype development
quality control

Technical Data:

heated area: 3 heated plates with each 210 mm x 210 mm
chamber height: 40 mm (optional up to 80 mm)
Mass Flow controller for Nitrogen (5 nlm)
vacuum atmosphere up to 10exp.-3 hPa (KF16 connector)
temperature up to 300 °C (higher on request)
ramp up rate: better 120 K/minute
ramp down rate: better 60 K/minute
SIMATIC© process control with 50 programs and 50 steps each
7″ touch panel
water cooled chamber (controlled and watched)
electrical connection type: 3x 230V,3P, +N, 18 kW

Options and accessories

FA I	Formic acid module (separate module, not integrated) with Mass Flow Controller
FA II	integrated formic acid module with Mass Flow Controller
FA III	integrated formic acid module with shared Mass Flow Controller
MFC	additional Mass Flow Controller (max. 2 pcs)
RSS-EH	Chamber height 80mm instead of 40mm
RSS-H2	Hydrogen Module: for using 100% Hydrogen incl. gas line with Mass Flow Controller
RSS-H2S	Safety device to prevent uncontrolled emission of Hydrogen
RSS-IL	Interlock mechanism during operation
Lift Pins	Lift pin option for Wafer up and down movement
RSS-TC	Additional thermocouple (max. 3 pc)
VAC I	Basic Vacuum up to 3 hPa, incl. vacuum sensor and valve, excl. pump
VAC II	Comfort Vacuum up to 10E-3 hPa, incl, vacuum sensor and valve, excl. pump
MP	Membrane/Diapgraghm pump for vacuum up to 3 hPa
MPC	Chemical resistant membrane pump for vakuum up to 3 hPa
RVP	Rotary vane pump for vacuum up to 10E-3 hPa with oilfilter
WC II	Closed loop water cooling system